Fence Installation in DFW: Types, Costs, Permits, and HOA Rules (2026 Guide)

What Types of Fences Does 3:16 Roofing Install in DFW?

3:16 Roofing and Construction installs all major fence types for DFW residential and commercial properties. Wood fencing (cedar and pine) remains the most popular choice in Tarrant County, offering privacy and a classic Texas look. Cedar board-on-board fencing with a cap and trim is our most requested style, providing full privacy with enhanced curb appeal. Wrought iron and ornamental steel fencing suits front yards, pool enclosures, and properties needing visibility with security. Vinyl (PVC) fencing offers zero-maintenance durability for homeowners who want privacy without annual staining. Chain link fencing serves commercial properties, pet containment, and utility areas at the lowest installed cost. We also build custom gates, including sliding gates and automatic gate openers for driveways.

How Much Does a New Fence Cost in the DFW Area in 2026?

Fence installation costs in DFW depend on material, linear footage, height, and terrain. Cedar board-on-board privacy fencing (the most common DFW style) runs $28 to $45 per linear foot installed in 2026, including posts, concrete, pickets, rails, and a cap. For a typical DFW backyard of 150-200 linear feet, that's $4,200 to $9,000. Wrought iron runs $35 to $75 per linear foot. Vinyl privacy fencing costs $30 to $55 per linear foot. Chain link ranges from $15 to $25 per linear foot. Gates add $300 to $1,500 depending on width and style. Automatic gate openers start at $1,500 installed. 3:16 Roofing provides free on-site estimates with exact measurements and transparent pricing.

Do I Need a Permit to Build a Fence in Keller or Fort Worth?

Permit requirements vary by city across DFW. In Keller, residential fences over 4 feet tall in front yards or over 8 feet tall anywhere require a permit. Fort Worth requires permits for fences exceeding 8 feet in height. Most standard 6-foot backyard privacy fences in both cities do not require a permit but must comply with setback requirements (typically 1-2 feet from the property line). HOA communities throughout DFW often have additional restrictions on fence height, material, color, and style that must be approved before installation. 3:16 Roofing handles the HOA submittal process for communities like Marshall Ridge (Keller), Timarron (Southlake), and The Highlands (Trophy Club). We pull permits when required and ensure every installation meets local code.

How Long Does Fence Installation Take?

Most residential fence installations in DFW take 1 to 3 days depending on linear footage and terrain. A standard 150-foot cedar privacy fence on flat ground is typically completed in one day. Larger properties, sloped terrain, or custom designs may extend to 2-3 days. Iron and vinyl installations generally take slightly longer due to fabrication and setting requirements. Our crews handle complete site preparation, old fence removal (if needed), post hole digging, concrete setting, and thorough cleanup. We schedule installations based on weather conditions since post concrete needs 24-48 hours to cure before hanging pickets in high-wind areas.

Schedule Your Free Fence Estimate in DFW

Whether you need a new cedar privacy fence, iron pool enclosure, or commercial chain link, 3:16 Roofing and Construction provides expert fence installation across the entire DFW metroplex. Our fence division operates from our Keller headquarters at 424 Keller Parkway with the same quality standards and customer care that earned us a 4.9-star Google rating on our roofing work. Call (817) 402-7663 or visit 316roofingtx.com/contact-us for your free on-site fence estimate.